Back to Products

HA180 Automatic paint dispenser - Dispensers

  • Compact design
  • Harbil® ZeroPurge™ piston pump
  • Fast and reliable

The HA180 is the ideal solution for small to medium-sized locations. A true Harbil that’s more compact without any compromises on canister sizes and flexibility, can height and speed. The ZeroPurge™ piston pump and AutoDrive ™ ensure future proof efficiency and reliability for your business operation.

Specifications

  • Sequential dispensing
  • Up to 24 canisters (POM) in 2.3/4.6 l
  • ZeroPurge Piston pump technology
  • Universal, solvent and water based colorants
  • Pump size: 40 ml
  • Flow rate: 0.4 – 0.5 l/min
  • Smallest dispense: 0.05 ml
  • Operator display
  • Manual can table (Electric optional)
  • Electric punch (optional)
  • Heating set (optional)
  • HWD 140x81x100 cm

For all product Insights and updates please visit:
https://www.harbilnextgen.com/

Request information about the HA180 Automatic paint dispenser

Technical data

General

  • Automatic sequential
  • Colorants: Solvent based, water based, universal

Canisters

  • Up to 24 canisters
  • Sizes: 2.3/4.6 L
  • Material: Polymeric (POM)

Pump

  • Harbil® ZeroPurge™ Piston pump
  • Size: 40 ml
  • Flow rate: 0.4 - 0.5 l/min
  • Min. Dispense: 0.05 ml
  • Nozzle diameter: 2/4/6 mm
  • Stainless steel ball valve
  • Seals material: Teflon / Viton extreme / Viton
  • Zero Purge™
  • Copied calibration - no recalibration required

Nozzles

  • Air tight - integrated nozzle closures
  • Cleaning system: automatic brush & internal flush

Can table

  • Manual lift
  • Dimensions: 44 x 31 cm
  • Loading height: 36 cm
  • Max. can height: 46 cm
  • Optical can sensor

Dimensions & Weight

  • HWD 140 x 81 x 100 cm
  • Filling height: 131 cm
  • Packaging dimensions: 193 x 117x 98 cm
  • Weight (for transport): 180 - 200 kg

Power supply & Safety

  • 110V +/- 10%, 50Hz/60Hz
    230V +/- 10%, 50Hz/60Hz
  • CE certified

Options

  • Electric punch 46 mm, heating set, large can table plate, different colours (RAL).

Options and Accessories

When you order options or accessories, they both allow you to personalize your machine to your specifications. Options are factory-installed features and you will find them built in to your machine when it arrives. Accessories are supplied separately and have to be mounted during or after the installation.

Below is a list of the available options & accessories for this product.

Options

Can positioning light HA

Can positioning light HA

The can positioning light shows the operator were the middle of the can shelf is, in order to place a can straight underneath the dispensing point of the machine.

If you are purchasing a new Harbil Series dispenser, you can order the CPL as an optional accessory. You can retrofit your current generation Harbil design by ordering a retrofit kit.

Read more in our blog: https://emea.fast-fluid.com/news/can-positioning-light/

Can positioning light HA

Computer shelf

Computer shelf

This shelf can be used in an HA180 to higher the bottom plate in order to lift the computer for easier access.

Heating set

Heating set

Integrated heating device that can be placed on the inside of a dispenser, to heaten up the temperature  in order to keep your colorants in good condition. 

Heating set

Punch 46 mm

Punch 46 mm

The integrated punching system, in order to punch a hole of 46 mm into the lid of the can after which a dispense can start.

Punch 46 mm

Spray

Spray

Our Spray solution, optional in HA180 and HA480, has been specifically designed to protect vulnerable biocide-free colorant systems of up to 24 colorants. Applied using our unique spraying canister lids, the Spray liquid disinfects the headspace of the canisters, providing thorough protection. Additionally, our programmable Spray system allows you to tailor the interval and duration of the Spray. This optimizes the conditioning of your colorants, ensuring they remain vibrant and healthy for longer.

Spray

Accessories

Monitor support kit

Monitor support kit

A bracket to secure the monitor to the HA180. It is possible to move the monitor left or right.

Monitor support kit

Monitor support kit

Mouse plate & printer bracket

Mouse plate & printer bracket

A bracket that can be mounted on both sides of the dispenser. Contains two specific items; one to place the mouse on and one for an SLP (compact) printer.

Satellite overhang stand

Satellite overhang stand

The side table used to set up over a shaker offering space for a monitor, keyboard, mouse, printer and other peripherals. 

Satellite overhang stand

Stand alone punch 46mm or 48mm

Stand alone punch 46mm or 48mm

An external punching system in order to punch a hole into the lid of the can to be able to dispense through the punched hole. The stand alone punch is available in 2 different punch knife sizes of 46 or 48 mm.

Stand alone punch 46mm or 48mm

Ventilation interface adapter

Ventilation interface adapter

The adaptor allows you to connect all Harbil and X-PROTINT dispensers produced as from mid-2020 to an external air extraction system.

It can be fit into the ‘push-out hole’ of the machine’s rear panel.

For more information read our blog .

Ventilation interface adapter